When selecting your wheels, you need to consider several things, such as the right size, aesthetic appeal, and budget. In addition, your car’s wheels should fit the vehicle’s suspension, gearing, and bodywork. Therefore, aligning wheel size with the right suspension, gearing, and bodywork ensures good car performance and the quality of the ride.

 

Finding Fitting Car Wheel Covers

To pick the right car wheel covers, you must know the size of your wheels. The first thing to do is to figure out if you want a bolt-on cover or one that requires the use of clips. The choice of covers will depend on what kind of wheels you have. To ensure the wheel covers will fit, you must know the wheel’s diameter, width, and lug pattern.

 

How To Find Your Rim Size and Read Your Wheels

Most passenger cars come with either a 16-inch wheel or 15-inch wheel. Larger vehicles such as sport-utility vehicles use 18 to 20 inches’ tires. A tire’s size uses a P-metric number that consists of its width in millimeters followed by a dash and its rim diameter in whole numbers or decimals. For example, 205/55 R16 92H indicates a tire width of 205 millimeters, a rim diameter of 16 inches, and an H speed rating. You will use this information to get the right wheels, car rims, and car wheel covers next time they need replacing.

 

Bolt Patterns on Your Wheels

Before buying new car wheel covers or car rims, you must know the bolt patterns on your wheels. Likewise, when buying replacements for your car, be it a new set of tires or new rims, you must know the bolt pattern on your wheels. Most cars have the 4-, 5-, 6-, or 8-lug patterns. The bolt patterns are precisely spaced and help guide you in your new rims choices. In addition, you should make sure that the new wheels match the spacing between the wheel studs.

 

Importance of Fitment

To have your rims fit correctly on your car, you need to have the hub size and the wheel center bore measurement and the number of wheel studs required. The hub size and the number of wheel studs are needed to determine your tire’s correct outer rim diameter. The hub size indicated in mm is also required to determine the drive-side length of your car’s axle.

 

Offset and Backspace

The offset, measured in millimeters, determines how far away from the center of the wheel the tire sits. A positive number means that it sits outside the rim, and a negative number means it sits inside it. Wheel backspace is the wheel’s center’s distance to the vehicle’s mounting surface. The wheel offset determines how much a car bumps over uneven surfaces, and hence the ride’s quality.

Understanding the sizing of your wheels will help you make more intelligent and time-saving purchases of car wheel covers, tires and wheels. Whether you’re looking to upgrade your car or buy new wheels and tires, knowing how wheel size works will help you choose the right fit for your vehicle.

Pin It on Pinterest